How Do I Measure My Current Cane for a Replacement Tip?

Follow the steps below, or watch the video

1. The first step is to remove the rubber cane tip, using a turning motion to twist and loosen.

If you’re having trouble removing the tip, we recommend using a hair dryer to heat the rubber material and make it softer, or use a heavy duty paper clip to break the suction between the tip and cane shaft, while being mindful not to scratch the shaft.

2. After removing the rubber tip, the next step is to print the Cane Tip Sizing Sheet.

Click here to download and print the sheet.

3. When you are printing the Cane Tip Sizing Sheet, click More settings,

and make sure the Scale is set to 100%

The print screens may look different, depending on the type of computer you are using.

4. After you print the document, place a quarter on the image, to make sure the scale is correct.

5. Place the tip of your cane on the dotted circles, and make sure the dotted lines touch exactly to the sides of the cane.

Be sure to measure the cane shaft, with the rubber tip removed.

Watch the Video Below:

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us